NEC Univerge SV8100 Features And Specifications Manual page 143

UNIVERGE SV8100
The examples below use the following system programming:
Program 26-02 for Dial Analysis Table for ARS set as:
Program 26-02-01
Table No.
1 203@@@@@@@
2 214@@@@@@@
197 @@@@@@@@@@
198 @@@@@@@@@@
199 @@@@@@@@@@
200 @@@@@@@@@@
Program 12-02 for Automatic Night Service Patterns as:
Time Program 12-02-01
Pattern No.
1
2
3
Program 12-02 for Automatic Night Service Patterns as:
Mode
Mode 1 (Day)
Mode 2 (Night)
Program 26-01-03 for ARS Misdialed Number Handling as: 1 (Warning Tone)
With Program 26-01-06: ARS COS Match Access disabled (set to 0):
If at 9:00 AM, each extension dialed 9+(203)926-5400

All Extension would use Trunk Group 3
If at 9:00 AM, each extension dialed 9+(214)262-2000

All Extension would use Trunk Group 1
If at 6:00 PM, each extension dialed 9+(203)926-5400

All Extension would use Trunk Group 3
If at 6:00 PM, each extension dialed 9+(214)262-2000

Extension 301, 302 and 401 would use Trunk Group 1
Extension 402 would not be able to dial out as the COS is lower
Automatic Route Selection
Program 26-02-02
Dial Service Type
1:Route to trunk group
1:Route to trunk group
1:Route to trunk group
1:Route to trunk group
1:Route to trunk group
1:Route to trunk group
Program 12-02-02
Start Time
00:00
08:30
17:00
Ext. 301 Ext. 302
1
1
Program 26-02-03
Add Data
3 (Group 3)
1 (Group 1)
2 (Group 2)
3 (Group 3)
2 (Group 2)
1 (Group 1)
End Time
08:30
17:00
00:00
Ext. 401
2 3
4 3
Program 26-02-04
ARS COS
Program 12-02-03
Operation Mode
2 (Night)
1 (Day)
2 (Night)
Ext. 402
3
5
Issue 11.0
5
4
4
3
2
1
2 - 111