NEC Univerge SV8100 Features And Specifications Manual page 158

Issue 11.0
Program
Program Name
Number
44-04-01 ARS/F-Route Selection for Time
Schedule
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-02 ARS/F-Route Table – Delete
Digits
44-05-03 ARS/F-Route Table – Additional
Dial Number Table
44-05-04 ARS/F-Route Table – Beep Tone
44-05-05 ARS/F-Route Table – Gain Table
Number for Internal Call
44-05-06 ARS/F-Route Table – Gain Table
Number for Tandem
Connections
44-05-07 ARS/F-Route Table – ARS Class
of Service
44-05-08 ARS/F-Route Table – Dial
Treatment
44-05-09 ARS/F-Route Table – Maximum
Digit
2 - 126
Description/Comments
Assign each ARS/F-Route
Selection number (1~500) to an
ARS/F-Route table number for
each ARS/F-Route time mode.
There are eight time modes for
ARS/F-Route Access.
Select the trunk group number to
be used for the outgoing ARS call.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Enter the number of digits to
be deleted (0~255) from the dialed
number.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Enter the table number
(defined in Program 44-06) for
additional digits to be dialed
(0~1000).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select whether or not a
beep is heard if a lower priority
trunk group is used.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for internal
calls (0~500).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for the tandem
call (defined in Program 44-07).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Class of Service
to be used for ARS (0~16).
Extension ARS COS is
determined in Program 26-04-01.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Dial Treatment to
be used (0~15). The Dial
Treatments are defined in
Program 26-03-01.
Set the maximum number of digits
to send when using the F-Route.
UNIVERGE SV8100
Assigned Data
1
ARS/F-Route Time
Mode: 1~8
ARS/F-Route Table
Number = 0~500
(default = 0)
0~100, 255
0 = No Setting

255 = Extension Call
(default = 0)
0~255
(255 = Delete All)

(default = 0)
0~1000
(default = 0)

0 = Off (No Beep)
1 = On (Beep)s

(default = 0)
0~500
0 = No Setting

(default = 0)
0~500
0 = No Setting

(default = 0)
0~16
(default = 0)

0~15
(default = 0)

0~24

(default = 0)
Automatic Route Selection
Level
2 3
