NEC Univerge SV8100 Features And Specifications Manual page 439

UNIVERGE SV8100
Program
Program Name
Number
16-02-01 Department Group Assignment
for Extensions
16-03-01 Secondary Department Group
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
20-13-06
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-14 Class of Service Options
(Supplementary Service) –
Department Calling (PLT No
Called Extension)
Department Calling
Description/Comments
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Assign extensions to multiple
Department Groups and set the
priority assignment. Each
Secondary Department Group can
have up to 16 extensions
assigned.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is busy.
Turn Off or On an extension user
in a Department Group ability to
use the Trunk-to-Trunk Forwarding
service codes.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
Turn Off or On an extension user
ability to call a Department Group
Pilot.
Assigned Data
1
Department Groups
1~64
Priority 1~999
Default = 1
extensions in

Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
Extension Number
Maximum eight digits
Priority Order
0~999
(default not assigned)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 11.0
Level
2 3






2 - 407