Set Dtr (Dive Time Remaining) Alarm - Aeris Epic Operating Manual

SET DTR (DIVE TIME REMAINING) ALARM

Information includes (Fig. 52):
> Graphic DTR
> Symbols AIR, TIM , NDC, and O2.
> Set Point value, flashing.
 Pressing and releasing the S button momentarily (< 2
seconds) will increase the Set Point from 0:00 to 0:20
(:minutes) in 1 minute (0:01) increments.
 Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the S T
TURN PR SSUR ALARM screen with the Set Point flashing.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other S T A screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the S T A
screen.
 Depressing and holding the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation will
revert to the NORM or GAUG SURF MAIN screen.
Whichever Time (No
Decompression, O2,
or Air Time Remain-
ing) decreases to the
Alarm Set Point will
activate the Alarm.
59