Set Norm Dtr (Dive Time Remaining) Alarm - Aeris Manta Operating Manual

 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET A
screen.
 Depressing and holding the button for 2 seconds or if
no button is pressed for a period of 2 minutes operation
will revert to the NOR or GAUG SURF AIN screen.
SET ORM DTR (DIVE TIME REMAI I G) ALARM,
information includes (Fig. 45):
> Graphic DTR
> Set Point value (hr:min) flashing, with TI E, O2, and NDC
icons.
 Pressing and releasing the S button momentarily (< 2
seconds) will increase the Set Point from 0:00 to 0:20
(:minutes) in 1 minute (0:01) increments.
 Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
PO2 ALAR screen with the Set Point flashing.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET A screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET A
screen.
Whichever Time
(NDC or O2)
decreases to the
Alarm Set Point will
activate the Alarm.
51