Seat Removal
Refer to Safety Precautions on page 117.
All seats can be removed in the same manner.
Removal
1. Open the door (page 51).
2. Pull the seat lock lever at the front center of the seat.
3. Pull the front of the seat upward then slide it slightly forward.
seat lock lever
Installation
1. Insert the hooks into the frame and the prongs into the
grommets of the seat.
2. Press down on the seat until it locks.
Make sure that the seat is locked securely in position by pulling it up
lightly.
Since the bottom shapes of the driver/left rear passenger seats and
front/right rear passenger seats are different, install them in their
correct position.
132
Servicing Your Honda
hooks
prongs
seat
grommets