Console Assembly Replacement; Top Cover Removal/Installation - Xerox 5915 Service Manual

4-40

10.2.1 Console Assembly Replacement

Removal
1. WARNING: Power off the machine and
disconnect the power cord.
2. Open the Front Cover.
3. (Fig. 1): Remove the Console Assembly.
. Remove Screws(3).
. Disconnect P/J's 417/418.
. Remove Console Assy.
3
2
1
(Fig. 1)
Installation
1. Perform the installation in the reverse order of
removal.

10.2.2 Top Cover Removal/Installation

Removal
1. WARNING: Power off the machine and
disconnect the power cord.
2. Remove the Platen Cover .
3. Remove the Platen Glass. .................. (4.1.1)
4. Remove the Console Assy. ............... (10.2.1)
5. Remove the Drum Unit and place a black
bag over it. ................................... (5.1.1)
6. Remove the Deve. Unit. ...................... (6.2.1)
7. Disconnect P/J200 from ISIL.
8. (Fig. 1): Remove the Top Cover.
. Remove Screws(4).
. Disconnect the following:
P/J209
T64,T65(for Front Interlock Switch)
P/J100(for Optical Regi. Sensor)
. Remove Screw and Ground Wire.
. Remove Top Cover.
(Fig. 1)
Installation
1. Perform the installation in the reverse order of
removal.
Section 4 Disassembly/Assembly/Adjustment
10. Covers & Frame