Control Panel - Xerox XC811 Manual

Control Panel

The control panel has keys and lights that are used to control and display
the conditions of the copier.
1. Exposure Mode: The Exposure mode is used to adjust the amount of
background that will be copied.
Auto contrast – for copying originals with a coloured background.
Text – for copying text.
Photo – for copying photographs.
Toner Save – lowers the cost of copying by decreasing the overall
copy density. The copy quality is reduced, but it is still suitable for
proofs and rough drafts.
2. Copy Contrast: Lightens or darkens copies while in the Text, Photo,
or Toner Save settings.
• The copy Lighter/Darker feature is unavailable when Auto contrast
is selected.
• There are 5 contrast settings represented by 3 indicator lights.
Refer to Copy Quality section for more details.
3. Bound Original Copying (XC822/ XC830/ XC855/ XC875/ XC1033/
XC1044/ XC1045/ XC1245): Makes copies from a bound document.
4. Copier Diagram: Helps you locate areas that require attention. The
indicators will flash in the area requiring attention.
5. Paper Supply Selection (XC875/XC1045/ XC1245): Press to change
the selected paper supply. The selected paper supply location will be
indicated by a green light on the copier diagram.
10