Programmable Feature Setting 10 - Xerox XC811 Manual

Programmable Feature Setting 10

Use the following procedure to change the preset Reduction/Enlargement
default setting. This feature allows you to set a specific preset reduction
or enlargement between 70 – 141%.
Auto
Auto
Xerox
70% 141%
%
Xerox
70% 141%
%
1. Select the Toner Saver mode.
2. Press and hold the Exposure Mode key
for approximately 4 to 6 seconds.
•
The light next to Auto mode will light.
•
The lights within the Copier Diagram
will flash.
3. Press the left-hand quantity key until the
number 10 is displayed.
4. Press Start.
•
The current Reduction/Enlargement
setting will flash.
5. Press the variable percentage keys until
the desired percentage is displayed.
6. Press Start to store the selection.
7. Press the Clear key to continue making
other changes. Press the Exposure mode
key to return to the copy mode.
29