Calibration Motor - Xerox 5101 User Manual

MOTOR: OFF
10. Turn the motor on.
a) Press the Previous or Next key to highlight MOTOR.
b) Press the Enter key to confirm your selection.
c) Press the Previous or Next key to select ON. The choices are ON and OFF.
d) Press the Enter key to confirm your selection.
11. Select the motor speed.
a) Press the Previous or Next key to highlight SPEED.
b) Press the Enter key to confirm your selection.
c) Press the Previous or Next key to select the desired motor speed. The choices
d) Press the Enter key to confirm your selection.
12. Select the motor direction.
a) Press the Previous or Next key to highlight DIRECTION.
b) Press the Enter key to confirm your selection.
c) Press the Previous or Next key to select the desired motor direction. The
d) Press the Enter key to confirm your selection.
13. Press the Start key to activate the motor.
14. Press the Exit key to return to the COMPONENT TESTS menu screen.

Calibration Motor

Select the CALIBRATION MOTOR option to set the calibration zone motor.
To run the CALIBRATION MOTOR diagnostic:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key until DIAGNOSTICS is highlighted.
3. Press the Enter key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is
displayed.
4. Press the Next key until SCANNER DIAGNOSTICS is displayed.
5. Press the Enter key to select SCANNER DIAGNOSTICS. The SCANNER
DIAGNOSTICS menu screen is displayed.
6. Press the Next key until COMPONENT TESTS is highlighted.
7. Press the Enter key to select COMPONENT TESTS. The COMPONENTS TESTS
menu screen is displayed.
Wide Format Copy System User Guide
DOCUMENT MOTOR
DIRECTION:
Document Motor Screen
are .125, .250, .500, .750, 1, 1.5, 2, 3 and 4.
choices are FORWARD and REVERSE.
SPEED: .125
FORWARD
10 Main Menu
137