Key Features
Key Features
Each ATM module includes the following features:
•
Management through an SNMP management station, the Cisco IOS command-line
interface (CLI), or the web-based Cisco Visual Switch Manager (CVSM)
•
Full-duplex operation
•
155.52-Mbps data-transfer rate
•
Store-and-forward packet relay
•
LAN emulation client (LEC) for emulated LANs (ELANs)
•
ATM Adaptation Layer 5 (AAL5) for LAN emulation (LANE) data transfer
•
Multiple ELANs support for LANE (Catalyst 2900 series Cisco IOS Release
11.2(8)SA5 or later or with IOS Release 12.0 or later)
•
Multiple virtual LAN (VLAN) mappings for Request For Comments (RFC) 1483
(Catalyst 2900 series IOS Release 11.2(8)SA5 or later or with IOS Release 12.0 or later)
•
User-Network Interface (UNI) versions 3.0 and 3.1 for switched virtual connections
(SVCs) and permanent virtual connections (PVCs)
•
Support for Catalyst 2900 series IOS Release 11.2(8)SA5 or later
•
Supports up to 64 VLANs or ELANs
Each ATM module supports the following ATM management features:
•
Integrated Local Management Interface (ILMI) for ATM UNI versions 3.0 and 3.1
Management Information Bases (MIBs)
•
Operation, Administration, and Maintenance (OAM) cell implementation
Each ATM module complies with the following standards:
•
LANE 1.0 for LANE client only
•
Synchronous Optical Network (SONET) and Synchronous Transport Signal level 3,
concatenated (STS-3c) physical layer
•
Synchronous Digital Hierarchy (SDH) STM-1
1-4
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide