Igmp Snooping Multicast Vlan Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be configured:
Parameter
Profile Name
Click the Add button to add a new entry. Click the Find button to locate a specific entry based on the information entered. Click
the Delete All button to remove all the entries listed. Click the View All button to display all the existing entries. Click the Delete
button to remove the corresponding entry. Click the
the specific entry.
Click the Group List link to see the following window.
Figure 3 - 50. Multicast Group Profile Multicast Address Settings window
The following parameters can be configured:
Parameter
Multicast Address List
Click the Add button to add a new entry based on the information entered. Click the <<Back button to discard the changes made
and return to the previous page. Click the Delete button to remove the corresponding entry.

IGMP Snooping Multicast VLAN Settings

This window is used to configure the IGMP snooping multicast VLAN parameters.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Snooping Multicast
VLAN Settings:
The following parameters can be configured:
Parameter
IGMP Multicast VLAN State
IGMP Multicast VLAN
Forward Unmatched
Description
Enter a name for the IP Multicast Profile.
Group List
Description
Enter the multicast address list value.
Figure 3 - 51. IGMP Snooping Multicast VLAN Settings window
Description
Click the radio buttons to enable or disable the IGMP Multicast VLAN state.
Click the radio buttons to enable or disable the IGMP Multicast VLAN Forwarding state.
link to configure the Multicast Group Profile Address Settings for
85