D-Link xStack Reference Manual page 259

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be set:
Parameter
Daylight Saving Time State
Daylight Saving Time Offset In Minutes
Time Zone Offset From GMT In +/- HH:MM
DST Repeating Settings – Using repeating mode will enable DST seasonal time adjustment. Repeating mode
requires that the DST beginning and ending date be specified using a formula. For example, specify to begin DST on
Saturday during the second week of April and end DST on Sunday during the last week of October.
From: Which Week Of The Month
From: Day Of Week
From: Month
From: Time In HH:MM
To: Which Week Of The Month
To: Day Of Week
To: Month
To: Time In HH:MM
Figure 8 - 24. Time Zone Settings window
Description
Use this drop-down menu to enable or disable the DST Settings.
Use this drop-down menu to specify the amount of time that will
constitute your local DST offset. The available options are 30, 60,
90, or 120 minutes.
Use these drop-down menus to specify your local time zone's offset
from Greenwich Mean Time (GMT.)
Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Enter the month DST will start on.
Enter the time of day that DST will start on.
Enter the week of the month the DST will end.
Enter the day of the week that DST will end.
Enter the month that DST will end.
Enter the time DST will end.
245