Mac Block List - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
To view this window, click Security > IP-MAC-Port Binding (IMPB) > IMPB Entry Settings as shown below:
The following fields can be set or modified:
Parameter
IPv4 Address
IPv6 Address
MAC Address
Ports
Click Apply to implement changes. Click Find to search for an entry. Click View All for the table to display all entries or Delete
All to remove all the static entries. Click the Edit button to configure the specified entry. Click the Delete button to remove the
specified entry.

MAC Block List

This window is used to view unauthorized devices that have been blocked by IP-MAC binding restrictions.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > MAC Block List, as shown below:
The following fields can be configured:
Parameter
VLAN Name
MAC Address
To find an unauthorized device MAC address that has been blocked by the IP-MAC binding restrictions, enter the VID and MAC
Address in the appropriate fields and click Find. To view all entries, click the View All button. To delete an entry, click the
Delete button next to the entry's port. To delete all the entries in this window, click the Delete All button.
Figure 6 - 8. IMPB Entry Settings window
Description
Click the radio button and enter the IPv4 address to bind to the MAC address set below.
Click the radio button and enter the IPv6 address to bind to the MAC address set below.
Enter the MAC address to bind to the IP Address set above.
Specify the switch ports for which to configure this IP-MAC binding entry (IP Address + MAC
Address). Click the All check box to configure this entry for all ports on the Switch.
Figure 6 - 9. MAC Block List window
Description
Enter the name of the VLAN you want to find or delete.
Enter the MAC address of the MAC Address you want to find or delete.
136