D-Link xStack Reference Manual page 232

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
To view the settings of a previously correctly created profile, click the corresponding Show Details button on the CPU Access
Profile List window to view the following window:
Figure 7 - 25. CPU Access Profile Detail Information window for Ethernet
The window shown below is the Add CPU ACL Profile window for IPv4.
The following parameters can be cconfigured:
Parameter
Select Profile ID
Select ACL Type
Figure 7 - 26. Add CPU ACL Profile window for IPv4
Description
Use the drop-down menu to select a unique identifier number for this profile set. This value
can be set from 1 to 5.
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet
content mask. This will change the menu according to the requirements for the type of
profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content Mask to specify a mask to examine the content of the packet header.
218