Lldp-Med; Lldp-Med System Settings; Lldp-Med Port Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click the <<Back button to return to the previous page.

LLDP-MED

LLDP-MED System Settings

This window is used to configure the LLDP-MED log state and the fast start repeat count, and display the LLDP-MED system
information.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED System Settings:
The following parameters can be configured:
Parameter
LLDP-MED Log State
Fast Start Repeat Count
(1-10)
Click Apply to implement the changes made.

LLDP-MED Port Settings

This window is used to enable or disable transmitting LLDP-MED TLVs.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Port Settings:
Figure 3 - 84. LLDP Local Port Information – Show Normal window
Figure 3 - 85. LLDP-MED System Settings window
Description
Click the radio buttons to enable or disable the log state of LLDP-MED events.
Enter a value between 1 and 10 for the fast start repeat count. When an LLDP-MED
Capabilities TLV is detected for an MSAP identifier not associated with an existing LLDP
remote system MIB, then the application layer shall start the fast start mechanism and set
the 'medFastStart' timer to 'medFastStartRepeatCount' times 1. The default value is 4.
111