Download Configuration File To Sd Card; Download Firmware/Download Firmware To Nv-Ram; Download Firmware To Sd Card - D-Link xStack Reference Manual
Web ui reference guide layer 2 managed gigabit ethernet switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Download Configuration File to SD Card
Figure 11 - 8. Download Configuration File to SD Card window (DGS-3200-24)
Use the radio button to select either IPv4 or IPv6. Enter the TFTP Server IP address for the type of IP selected. Specify the
path/file name of the TFTP File. Specify the SD Card File name. Click Download to initiate the file transfer.
Download Firmware/Download Firmware to NV-RAM
The Switch supports dual image storage for firmware file backup and restoration. The firmware images are indexed as Active, 1,
or 2.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Download
Firmware to open the following window:
Figure 11 - 9. Download Firmware window (DGS-3200-10 and DGS-3200-16)
Figure 11 - 10. Download Firmware to NV-RAM window (DGS-3200-24)
Use the radio button to select either IPv4 or IPv6. Enter the TFTP Server IP address for the type of IP selected. Specify the
path/file name of the TFTP File. Select the desired Image ID, Active, 1 or 2. Click Download to initiate the file transfer.
Download Firmware to SD Card
274
Advertisement
Table of Contents
