Mld Router Port - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be configured:
Parameter
VLAN Name
VID List
IPv6 Address
Click the Find button to locate a specific entry based on the information entered. Click the Create button to add a new entry
based on the information entered. Click the Delete button to remove the specific entry based on the information entered. Click the
View All button to display all the existing entries. Click the Edit button to re-configure the specific entry. Enter a page number
and click the Go button to navigate to a specific page when multiple pages exist.
Click Edit to see the following window.
Select the appropriate ports individually to include them in the MLD snooping static group settings.
Click the Select All button to select all the ports for configuration. Click the Clear All button to unselect all the ports for
configuration. Click the Apply button to accept the changes made. Click the <<Back button to discard the changes made and
return to the previous page.

MLD Router Port

This window is used to display which of the Switch's ports are currently configured as router ports in IPv6. A router port
configured by a user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S.
A router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated by F.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Router Port:
Enter a VID (VLAN ID) in the field at the top of the window.
Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to
navigate to a specific page when multiple pages exist.
Figure 3 - 41. MLD Snooping Static Group Settings window
Description
The VLAN name of the multicast group.
The VID list of the multicast group.
Enter the IPv6 address.
Figure 3 - 42. MLD Snooping Static Group Settings – Edit window
Figure 3 - 43. MLD Router Port window
81