Igmp Snooping Rate Limit Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be configured:
Parameter
Static Router Port
Forbidden Router Port
Dynamic Router Port
Click the Select All button to select all the ports for configuration. Click the Clear All button to unselect all the ports for
configuration. Click the Apply button to accept the changes made. Click the <<Back button to discard the changes made and
return to the previous page.

IGMP Snooping Rate Limit Settings

This window is used to configure the IGMP snooping rate limit parameters.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Rate Limit
Settings:
The following parameters can be configured:
Parameter
Port List
VID List
Figure 3 - 27. IGMP Snooping Router Port Settings window
Description
This section is used to designate a range of ports as being connected to multicast-enabled
routers. This will ensure that all packets with such a router as its destination will reach the
multicast-enabled router regardless of the protocol.
This section is used to designate a range of ports as being not connected to multicast-
enabled routers. This ensures that the forbidden router port will not propagate routing
packets out.
Displays router ports that have been dynamically configured.
Figure 3 - 28. IGMP Snooping Rate Limit Settings window
Description
Enter the port list used for this configuration.
Enter the VID list used for this configuration.
72