Lldp-Med Remote Port Information; Nlb Fdb Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Select a Port number and click the Find button to locate a specific entry.

LLDP-MED Remote Port Information

This window displays the information learned from the neighbor parameters.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Remote Port Information:
Figure 3 - 88. LLDP-MED Remote Port Information window
Select a Port number and click the Find button to locate a specific entry.
To view the normal LLDP Remote Port information page per port, click the Show Normal button.
Figure 3 - 89. LLDP-MED Remote Port Information – Show Normal window
Click the <<Back button to return to the previous page.

NLB FDB Settings

The Switch supports Network Load Balancing (NLB). This is a MAC forwarding control for supporting the Microsoft server load
balancing application where multiple servers can share the same IP address and MAC address. The requests from clients will be
forwarded to all servers, but will only be processed by one of them. In multicast mode, the client uses a multicast MAC address as
the destination MAC to reach the server. Regardless of the mode, the destination MAC is the shared MAC. The server uses its
own MAC address (rather than the shared MAC) as the source MAC address of the reply packet. The NLB multicast FDB entry
will be mutually exclusive with the L2 multicast entry.
To view the following window, click L2 Features > NLB FDB Settings:
Figure 3 - 90. NLB FDB Settings window
113