Save All; Download Configuration File/Download Configuration File To Nv-Ram - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

Save All

Open the Save drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Save All to
immediately save the current configuration file and current log. The following window will open:
Download Configuration File/Download Configuration File to
NV-RAM
The Switch can store dual configuration files. The configuration files are indexed as Active, 1, or 2.
Open the Tools drop-down menu on the left-hand side of the menu bar at the top of the Web manager and click Download
Configuration File to open the following window:
Figure 11 - 6. Download Configuration window (DGS-3200-10 and DGS-3200-16)
Figure 11 - 7. Download Configuration to NV-RAM window (DGS-3200-24)
Use the radio button to select either IPv4 or IPv6. Enter the TFTP Server IP address for the type of IP selected. Specify the
path/file name of the TFTP File. Select the desired Configuration ID, Active, 1 or 2. Tick the Increment checkbox to allow the
download of a partial switch configuration file. This allows a file to be downloaded that will change only the switch parameters
explicitly stated in the configuration file. All other switch parameters will remain unchanged.
Click Apply to initiate the file transfer.
Figure 11 - 5. Save All window
273