DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the Delete button to remove the corresponding entry.
Click the
Group List
link to configure the Multicast Group Profile Address Settings for the specific entry.
After clicking the
Group List
The fields that can be configured are described below:
Parameter
Multicast Address List
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous window.
Click the Delete button to remove the corresponding entry.
IGMP Snooping Multicast VLAN Settings
On this page the user can configure the IGMP snooping multicast VLAN parameters.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Snooping
Multicast Group VLAN Settings, as show below:
The fields that can be configured are described below:
Parameter
IGMP Multicast VLAN
State
IGMP Multicast VLAN
Forward Unmatched
VLAN Name
VID (2-4094)
Remap Priority
link, the following page will appear:
Figure 7-67 Multicast Group Profile Multicast Address Settings window
Description
Enter the multicast address list value.
Figure 7-68 IGMP Snooping Multicast VLAN Settings window
Description
Click the radio buttons to enable or disable the IGMP Multicast VLAN state.
Click the radio buttons to enable or disable the IGMP Multicast VLAN Forwarding
Unmatched state.
Enter the VLAN Name used.
Enter the VID used.
0-7 – The remap priority value (0 to 7) to be associated with the data traffic to be
103