Power Saving Led Settings; Power Saving Port Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Port State
Power Saving Mode
Hibernation State
Action
Time Range Name
Click Apply to set the password encryption. Click the Clear Time Range to remove all the entries.

Power Saving LED Settings

This window is used to add or delete the power saving schedule on the LED of all ports.
To view the following window, click Configuration > Power Saving > Power Saving LED Settings:
The following parameter may be configured:
Parameter
Action
Time Range Name
Click the Apply button to save the settings. Click the Clear Time Range to remove all the entries.

Power Saving Port Settings

This window is used to set the power saving state.
To view the following window, click Configuration > Power Saving > Power Saving Port Settings:
The following parameter may be configured:
Parameter
From Port / To Port
Action
Time Range Name
Click the radio buttons to enable or disable hibernation state.
Use the drop down menu to add or delete the schedule.
Specify the name of the schedule.
Figure 2 – 31. Power Saving LED Settings window
Description
Use the drop down menu to add or delete the schedule.
Specify the name of the schedule.
Figure 2 – 32. Power Saving Port Settings window
Description
Use the drop-down menu to select the ports to be configured.
Use the drop down menu to add or delete the schedule.
Specify the name of the schedule.
25