D-Link xStack Reference Manual page 100

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
VLAN Name
VID (2-4094)
Click the Apply button to accept the changes made for each individual section. Click the Add button to add a new entry based on
the information entered. Click the Edit button to configure the IGMP Snooping Multicast VLAN Settings for the specific entry.
Click the Delete button to remove the specific entry. Click the
Settings for the specific entry.
Click the Edit button to see the following window.
Figure 3 - 52. IGMP Snooping Multicast VLAN Settings – Edit window
The following parameters can be configured:
Parameter
State
Replace Source IP
Untagged Member Ports
Tagged Member Ports
Tagged Source Ports
Click the Select All button to select all the ports for configuration. Click the Clear All button to unselect all the ports for
configuration. Click the Apply button to accept the changes made. Click the <<Back button to discard the changes made and
return to the previous page.
Click the Profile List link to see the following window.
Figure 3 - 53. IGMP Snooping Multicast VLAN Group List Settings window
Enter the VLAN Name used.
Enter the VID used.
Description
Use the drop-down menu to enable or disable the state.
With the IGMP snooping function, the IGMP report packet sent by the host will be
forwarded to the source port. Before forwarding of the packet, the source IP address in
the join packet needs to be replaced by this IP address. If none is specified, the source
IP address will use zero IP address.
Specify the untagged member port of the multicast VLAN.
Specify the tagged member port of the multicast VLAN.
Specify the source port or range of source ports as tagged members of the multicast
VLAN.
Profile List link to configure the IGMP Snooping Multicast VLAN
86