Mac-Based Access Control Local Settings; Mac-Based Access Control Authentication State - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button in the fourth section to implement the configuration changes.

MAC-based Access Control Local Settings

Users can set a list of MAC addresses, along with their corresponding target VLAN, which will be authenticated for the Switch.
Once a queried MAC address is matched in this window, it will be placed in the VLAN associated with it here. The Switch
administrator may enter up to 128 MAC addresses to be authenticated using the local method configured here.
To view the following window, click Security > MAC-based Access Control (MAC)> MAC-based Access Control Local
Settings:
The following parameters can be configured:
Parameter
MAC Address
VLAN Name
VID (1-4094)
Click the Delete by MAC button to remove the specific entry based on the MAC address entered. Click the Delete by VLAN
button to remove the specific entry based on the VLAN name or ID entered. Click the Find by MAC button to locate a specific
entry based on the MAC address entered. Click the Find by VLAN button to locate a specific entry based on the VLAN name or
ID entered. Click the View All button to display all the existing entries. Click the Edit by Name button to change the specific
MAC address' VLAN name. Click the Edit by ID button to change the specific MAC address' VLAN ID. Enter a page number
and click the Go button to navigate to a specific page when multiple pages exist.

MAC-based Access Control Authentication State

Users can use the MAC Authentication State window to display the MAC-based Access Control authentication MAC addreses.
To view the following window, click Security > MAC-based Access Control (MAC) > MAC-based Access Control
Authentication State:
Figure 6 - 55. MAC-based Access Control Authentication State window
The following parameters can be configured:
Parameter Description
Figure 6 - 54. MAC-based Access Control Local Settings window
Description
Enter the MAC address that will be added to the local authentication list.
Enter the VLAN name of the corresponding MAC address.
Enter the VLAN ID of the corresponding MAC address.
173