Dram & Flash Utilization - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
This window is used to display the percentage of the CPU being used, expressed as an integer percentage and calculated as a
simple average by time interval.
To view the following window, click Monitoring > CPU Utilization:
To view the CPU utilization by port, use the real-time graphic of the Switch and/or switch stack at the top of the web page by
simply clicking a port. Click Apply to implement the configured settings. The window will automatically refresh with new
updated statistics.
The following parameters can be configured:
Parameter
Time Interval
Record Number
Show/Hide
Click Apply to implement the changes.
DRAM & Flash Utilization
This window is used to display information regarding the DRAM and Flash utilization.
To view the following window, click Monitoring > DRAM & Flash Utilization:
Figure 10 - 3. CPU Utilization window
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
Check whether or not to display Five Secs, One Min, and Five Mins.
Figure 10 - 4. DRAM & Flash Utilization window
255