D-Link xStack Reference Manual page 234

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
The following parameters can be cconfigured:
Parameter
Select Profile ID
Select ACL Type
IPv6 Class
IPv6 Flow Label
IPv6 Source Address
IPv6 Destination
Address
Click Create to implement the changes.
Figure 7 - 28. Add CPU ACL Profile window for IPv6
Description
Use the drop-down menu to select a unique identifier number for this profile set. This value
can be set from 1 to 5.
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet
content mask. This will change the menu according to the requirements for the type of
profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content Mask to specify a mask to examine the content of the packet header.
Checking this field will instruct the Switch to examine the class field of the IPv6 header. This
class field is a part of the packet header that is similar to the Type of Service (ToS) or
Precedence bits field in IPv4.
Checking this field will instruct the Switch to examine the flow label field of the IPv6 header.
This flow label field is used by a source to label sequences of packets such as non-default
quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by checking the
corresponding box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by checking the
corresponding box and entering the IP address mask.
220