D-Link xStack Reference Manual page 220

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
IPv6 Flow Label
IPv6 Source Address
IPv6 Destination
Address
Click Create to implement changes made.
To view the setting details for a created profile, click the Show Details button for the corresponding entry on the Access Profile
List window, revealing the following window:
The window shown below is the Add ACL Profile window for Packet Content:
The following parameters can be set for the Packet Content type:
Ticking this check box will instruct the Switch to examine the flow label field of the IPv6
header. This flow label field is used by a source to label sequences of packets such as non-
default quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by ticking the
corresponding check box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by ticking the
corresponding check box and entering the IP address mask.
Figure 7 - 8. Access Profile Detail Information window for IPv6
Figure 7 - 9. Add ACL Profile window for Packet Content
206