®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
IGMP Snooping Group
Users can view the Switch's IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast Group IP
address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click Monitoring > IGMP Snooping Group:
The following parameters can be configured:
Parameter
VLAN Name
VID List (e.g.: 1, 4-6)
Port List (e.g.: 1, 3-5)
Group IPv4 Address
Click the Find button to locate a specific entry based on the information entered. Click the View All button to display all the
existing entries.
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features folder and
select IGMP Snooping > IGMP Snooping Settings.
MLD Snooping Group
Users can view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function comparable to IGMP Snooping
for IPv4.
To view the following window, click Monitoring > MLD Snooping Group:
The following parameters can be configured:
Figure 10 - 21. IGMP Snooping Group window
Description
The VLAN Name of the multicast group.
The VLAN ID list of the multicast group.
Specify the port number(s) used to find a multicast group.
Enter the IPv4 address.
Figure 10 - 22. MLD Snooping Group window
268