Authenticator State; Authenticator Statistics - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Remember, to set an 802.1X guest VLAN, the user must first configure a normal VLAN, which can be enabled here for guest
VLAN status.
To view the following window, click Security > 802.1X > Guest VLAN Settings:
The following fields may be modified to enable the 802.1X guest VLAN:
Parameter Description
VLAN Name Enter the pre-configured VLAN name to create as an 802.1X guest VLAN.
Port Set the ports to be enabled for the 802.1X guest VLAN. Click All to select all ports.
Click Apply to implement the guest VLAN settings entered. Only one VLAN may be assigned as the 802.1X guest VLAN.

Authenticator State

This window is used to display the authenticator state. This window appears when the Authentication State is enabled in 802.1X
Global Settings window.
To view the following window, click Security > 802.1X > Authenticator State:
The following parameter can be configured:
Parameter Description
Port Use the drop-down menu to select a port.
Click the Find button to locate a specific entry based on the information entered. Click the Refresh button to refresh the display
table so that new entries will appear.

Authenticator Statistics

This window is used to display the authenticator statistics information. This window appears when the Authentication State is
enabled in 802.1X Global Settings window.
Figure 6 - 30. Guest VLAN Settings window
Figure 6 - 31. Authenticator State window
152