Mac-Based Access Control Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
4. Ports that have been enabled for Link Aggregation, Port Security, or GVRP authentication cannot be enabled for MAC-based
Authentication.

MAC-based Access Control Settings

This window is used to configure the MAC Settings for the MAC-based Access Control function on the Switch. The user can set
the running state, method of authentication, RADIUS password, view the Guest VLAN configuration to be associated with the
MAC-based Access Control function of the Switch, and configure ports to be enabled or disabled for the MAC-based Access
Control feature of the Switch. Please remember, ports enabled for certain other features, listed previously, can not be enabled for
MAC-based Access Control.
To view the following window, click Security > MAC-based Access Control (MAC) > MAC-based Access Control Settings:
The MAC Settings window is divided into four main sections. The top section configures the MAC Global State, the second
section is used to specify and configure the method used for authentication, the third section is used to configure the Guest VLAN
settings, and the fourth section is used to configure the ports that require MAC Settings configuration.
Configuring the MAC Global State:
Configure the parameter as described below:
Parameter
MAC Global State
Click the Apply button in the top section to implement the configuration changes.
Configuring the MAC Authentication Method:
Configure the parameters as described below:
Figure 6 - 53. MAC-based Access Control Settings window
Description
Toggle to globally enable or disable the MAC-based Access Control function on the Switch.
171