Igmp Router Port; Igmp Snooping Group - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

IGMP Router Port

This window is used to display which of the Switch's ports are currently configured as router ports. A router port configured by a
user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S. A router port
that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated by F.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Router Port:
Enter a VID (VLAN ID) in the field at the top of the window.
Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to
navigate to a specific page when multiple pages exist.

IGMP Snooping Group

This window is used to display the Switch's IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the
Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Group:
The following parameters can be configured:
Parameter
VLAN Name
VID List
Port List
Group IPv4 Address
Data Driven
Click the Find button to locate a specific entry based on the information entered. Click Clear Data Driven to delete the specified
IGMP snooping group learned by the data-driven mechanism. Click View All to see all the entries. Click Clear All Data Driven
to delete all the IGMP snooping groups learned by the data-driven mechanism.
Figure 3 - 31. IGMP Router Port window
Figure 3 - 32. IGMP Snooping Group window
Description
The VLAN name of the multicast group.
The VID list of the multicast group.
Specify the port number(s) used to find a multicast group.
Enter the IPv4 address.
Tick to display data-driven IGMP snooping group entries.
74