Ipv6 Interface Settings - D-Link xStack Reference Manual

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv6 Interface Settings

This window is used to display the Switch's current IPv6 interface settings.
To view the following window, click L3 Features > IPv6 Interface Settings:
To configure IPv6 interface settings, enter an Interface Name, a VLAN Name, and make sure the Interface Admin. State is
Enabled. Click the Create button. The new entry will appear in the Interface Table at the bottom of the window.
To modify an IPv6 Interface Table entry, click the corresponding Edit button. The following window opens:
The following parameters can be configured or viewed:
Parameter
Interface Name
VLAN Name
IPv6 Address
Admin. State
DHCPv6 Client
Figure 4 - 2. IPv4 Route Settings Window
Figure 4 - 3. IPv6 Interface Settings Window
Figure 4 - 4. IPv6 Interface Settings (Edit) Window
Description
The name of the IPv6 interface being modified.
Enter the VLAN name of the IPv6 interface.
Enter the IPv6 address of the interface to be modified.
Toggle the state between Enabled and Disabled.
Use the drop-down menu to enable or disable DHCPv6 client.
116