D-Link xStack Reference Manual page 320

®
xStack DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
coldStart
warmStart
linkDown
linkUp
authenticationFailure
newRoot
topologyChange
PowerFailure
PowerRecover
FanFailure
swSingleIPMSTopologyChange
notification to the indicated host when its
member generates a topology change
notification.
A coldStart trap signifies that the
sending protocol entity is reinitializing
itself such that the agent's configuration
or the protocol entity implementation
may be altered.
A warmStart trap signifies that the
sending protocol entity is reinitializing
itself such that neither the agent
configuration nor the protocol entity
implementation is altered.
A linkDown trap signifies that the
sending protocol entity recognizes a
failure in one of the communication links
represented in the agent's configuration.
A linkUp trap signifies that the sending
protocol entity recognizes that one of the
communication links represented in the
agent's configuration has come up.
An authenticationFailure trap signifies
that the sending protocol entity is the
address of a protocol message that is not
properly authenticated.While
implementations of the SNMP must be
capable of generating this trap, they
must also be capable of suppressing the
emission of such traps via an
implementation- specific mechanism.
The newRoot trap indicates that the
sending agent has become the new root
of the Spanning Tree; the trap is sent by
a bridge soon after its election as the
new root, e.g., upon action of the
Topology Change Timer immediately
subsequent to its election.
Implementation of this trap is optional.
A topologyChange trap is sent by a
bridge when any of its configured ports
transitions from the Learning state to the
Forwarding state, or from the
Forwarding state to the Blocking state.
The trap is not sent if a newRoot trap is
sent for the same transition.
Implementation of this trap is optional.
The PowerFailure trap indicates that at
least one power supply has failed.
The PowerRecover trap indicates that
the failed power is recovered.
The FanFailure trap indicates that any
306
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
1.3.6.1.2.1.17.0.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.171.12.11.2.2.2.0.2
(only DGS-3200-24)
1.3.6.1.4.1.171.12.11.2.2.2.0.3
(only DGS-3200-24)
1.3.6.1.4.1.171.12.11.2.2.3.0.1