Mac Based Access Control Local Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Guest VLAN Member Ports
From Port/To Port
State

MAC Based Access Control Local Settings

The following window is used to set a list of MAC addresses, along with their corresponding target VLAN, which will be
authenticated for the Switch. Once a queried MAC address is matched in this table, it will be placed in the VLAN
associated with it here. The switch administrator may enter up to 1024 MAC addresses to be authenticated using the
local method configured here. To enable the MAC Based Access Control Local MAC Settings on the switch, click
Security > MAC Based Access Control > MAC Based Access Control Local Settings
To add a MAC address to the local authentication list, enter the MAC address and the target VLAN name into their
appropriate fields and click Apply. To change a MAC address or a VLAN in the list, click the corresponding Edit
button. To delete a MAC address entry, enter its parameters into the appropriate fields and click Delete By Mac, to
delete a VLAN, enter its parameters into the appropriate fields and click Delete By VLAN. To search for a MAC or a
VLAN enter the information in the appropriate fields and click Find By MAC or Find By VLAN.
Displays the list of ports that have been configured for the Guest VLAN.
Enter the Port range.
Use the pull-down menu to enable or disable the MAC-Based Access Control function
on individual ports.
Figure 9- 44. MAC Based Access Control Local MAC Settings
Port Settings
163