Disable/Enable Is10, Spacommand And Is4 Spa-Side Remote; Keypad Lock - Intellitouch User Manual

Disable/Enable iS10, SpaCommand and iS4 Spa-Side Remote

This feature is useful if you wish to disable the use of the Spa-Side Remote. You can enable and disable the
spa-side remote with the same button. Each time the button is pressed it toggles between DISABLED or
ENABLED.
Press the MENU button. The Spa Side Remote Disable/Enable
screen is displayed.
1. To Disable: Press the button next to SPA SIDE REMOTE
ENABLED. Screen will immediately display SPA SIDE
REMOTE DISABLED. Remote is now off.
To Enable: Press the button next to SPA SIDE REMOTE
DISABLED. Screen will immediately display SPA SIDE
REMOTE ENABLED. Remote is now on.
2. Press the Back button to return to the main screen.

Keypad Lock

If required, the IntelliTouch indoor control panel and MobileTouch
wireless control panel can be passcode protected so that system
settings and operations cannot be accessed. To access a 'locked"
control panel, the correct previously assigned four digit passcode
must been entered before access is granted.
Getting There
MENU SETUP ADVANCED
Go to the KEYPAD LOCK screen
To assign a four digit passcode and enable the Keypad Lock
feature:
1. Press any combination of four digits using the buttons 1-9.
2. Press the ENABLE button to enable the Keypad Lock
feature.
3. Press the EXIT button to return to the main screen. Providing
the control panel is not active (no buttons pressed), the
Keypad Lock feature will be activated in a few minutes.
Clear Button: Press the CLEAR button to erase the previously
entered four digit passcode. If the Keypad Lock feature is
"Enabled," pressing Clear will erase the previously entered four
digits and reset the feature to "disabled."
Enable/Disable button:
Enable: Pressing the ENABLE button after entering the four digit
passcode will enable the Keypad Lock feature.
Disable: Pressing the DISABLE button will disable the Keypad Lock feature while also retaining the previously
entered four digit passcode.
KEYPAD LOCK
PROGRAM
SETUP
DELAY CANCEL
SPA SIDE REMOTE ENABLE
MENU
BACK
0
1
2
3
4
KEYCODE 0000
KEYPAD LOCK IS DISABLED
BACK SAVE ENABLE
0
1
2
3
4
KEYCODE 4747
KEYPAD LOCK IS ENABLED
BACK SAVE DISABLE
Keypad Lock ENABLED
IntelliTouch Pool and Spa Control System User's Guide
83
5
6
7
8
0
EXIT
5
6
7
8
0
EXIT