Setting Up Magicstream Laminars - Intellitouch User Manual

50

Setting up MagicStream Laminars

The MagicStream Laminar provide a clear, turbulence-free stream of water that is lit with a fiber optic cable, or
an LED light for a dazzling nighttime effect. The 12 VAC powered LED light can generate a series of
multicolored light shows, or can be set to display a continuous, single color. If desired, the built-in solenoid
"thumper" can create a random "wrinkle," in the Laminar's stream, causing it to display a brilliant spot of light
that moves along the stream's arc. The light enhancer can be adjusted to maximize the light in the arc.
Up to twelve (12) MagicStream Laminar circuits can be displayed on the main Lights screen, assuming each
laminar has its own relay and separate circuit.. From the Lights screen you can activate the MagicStream
laminars (changing color modes, turn Thumper on/off, Hold and Reset). For more information, see the
MagicStream Installation Guide, P/N 520969.
Setting up MagicStream Laminar LED Lights
To setup MagicStream laminar circuits, first assign each laminar auxiliary relay circuit a circuit name, then
assigned the laminar relay circuit name in the "CIRCUIT FUNCTIONS" menu, as "MAGICSTREAM."
To setup the MagicStream laminar circuits:
Getting There
MENU SETUP ADVANCED
1. Press the button next to the AUX button (the relay circuit connected to the laminar).
2. Press the right or left side (PREV/NEXT) button next to "MAGICSTREAM." Scroll through the circuit
functions until "MAGICSTREAM" is displayed. See page 41 for the complete list of preset circuit
functions.
3. Press the SAVE button on the bottom of the screen. Press the EXIT button to return to the main screen.
4. Proceed to Step 5.
AUX 1
AUX 3
AUX 2
AUX 4
MENU/SETUP/ADV/FUNCTION/SELECT
BACK
IntelliTouch Pool and Spa Control System User's Guide
CIRCUIT FUNCTIONS
AUX 5
AUX 6
AUX 7
AUX 8
1
EXIT
AUX 4
MAGICSTREAM NEXT
PREV
ON WITH FREEZE NO
MENU/SETUP/ADV/FUNC/AUX 1
BACK SAVE EXIT