Setting Up The Intellitouch System Using The Indoor Control Panel Or Mobiletouch; The Preference Screen Options - Intellitouch User Manual

Setting up the IntelliTouch System using the Indoor Control Panel or
MobileTouch
The following describes how to configure and set up the IntelliTouch system using the Indoor Control Panel or
MobileTouch wireless control panel.

The Preference Screen Options

From the Preference screen you can change various screen options.
To change the screen settings go to the Preferences screen.
1. To change the display backlight: Press the top left or right side button to select the following options: OFF
IN 5 MIN, BLANK IN 5 MIN, and ALWAYS ON.
2. To change the display contrast: Press the left button to
decrease the display contrast level (lighter). Press the right
side button to increase the display contrast level (darker).
3. To change the brightness of the LED lights: Press either
the left or right side button to set the LED brightness level to
100%, 75%, 50%, or 25%.
4. To change the display backlight brightness: Press either
the left or right side button to set the Backlight Brightness
level to 100%, 75%, 50%, or 25%.
5. To turn the button beeper sound off/on: Press the button
next to User Interface. From the next screen, press the
button next to Beeper Level to OFF. To switch ON the
sound, select HIGH. Press the Back button when finished.
Note about Key Repeat: It is recommended to leave the
Key Repeat Delay and Rate set to the factory default
setting (1/2 and 15 PS). The Key Repeat Delay adjusts
the amount of time a key/button has to be held down
before it starts auto-repeating. Key Repeat Rate adjusts
the number of times per second (5, 10, 15, or 20 key
repeats per second) the key/button repeats once it is held
down.
6. When finished, to save the settings press the Exit button to
return to the main screen.
IntelliTouch Pool and Spa Control System User's Guide
33
15 PS