Intelliflo Vf 3050 Pump Setup; Intelliflo Set Parameters Screens; Assign Or Change A Pump Circuit Name - Intellitouch User Manual

58

IntelliFlo VF 3050 pump setup

IntelliFlo Set Parameters screens

From these screens you can assign a circuit name, set up the pump filtering, priming, backwash, vacuum
features, assign up eight pump flows (GPM), or view the current pump status.

Assign or change a pump circuit name

To assign a pump circuit:
Getting There
MENU SETUP EQUIPMENT INTELLIFLO
1. From the main pump screen, press the left side button next to the selected IntelliFlo pump. The current
circuit for the pump is displayed on the main pump screen.
2. On the next screen, press the right side button next to NONE. If you have already assigned a circuit the
current circuit name is displayed.
Note: The assigned circuits for the IntelliFlo pumps displayed on this screen are tied to the IntelliFlo
background "Filtering Parameters" (see page 59), which includes programmed run times, turnovers,
etc. This is also the circuit which all of the "Set Parameters" are linked to.
3. To assign a circuit name, press the PREV or NEXT lower button to select a circuit name for the pump. The
selected circuit name must also be assigned a circuit function. For details about assigning a circuit function and
a feature circuit, see pages 39 and 76.
Press this
button to select
the IntelliFlo
VF 3050 pump
4. Press the lower SAVE button to save the setting. The main Equipment screen is displayed. Press the
button next to
Select another IntelliFlo pump and repeat step 3 to assign a circuit name.
5. When finished, press the BACK button to return to the Equipment screen.
IntelliTouch Pool and Spa Control System User's Guide
IFLO VF 3050 #1 POOL
IFLO VS 3050 #2 SPA
IFLO VSF+SVRS #3
IFLO VS 3050 #4 AUX 3
NEXT GROUP OF PUMPS
MENU/SETP/EQUIP/IFLO/SELECT
BACK EXIT
. The main pump screen displays IntelliFlo #2 with the assigned circuit name.
INTELLIFLO
PENTAIR IFLO VF 3050
IFLO VF 3050 #1
SET PARAMETERS
ASSIGN CUSTOM FLOWS
INTELLIFLO STATUS
MENU/SETP/EQUIP/INTELLIFLO
BACK SAVE PREV
Save button
Prev and Next buttons
(use to adjust pump
speed)
Press
this
POOL
button to
assign a
pump
circuit
name
EXIT