Wired Controllers (Automatically Enabled); Adding Multiple Is10 (Spacommand) Spa-Side Remotes And Expansion Centers; Adding A Mobiletouch Wireless Controller - Intellitouch User Manual

Wired Controllers (Automatically Enabled)

When powered up for the first time, the IntelliTouch system will automatically enable one each of the following
wired controllers:
• Outdoor Control Panel (located in the main Load Center or Power Center)
• Indoor Control Panel (wired to the Personality board in Load Center). Note: Additional Indoor
Control Panels must be manually assignment.
• iS10 Spa-Side Remote (wired to the Personality board in Load Center). Note: Additional iS10
remotes need to be manually assigned, see page 30).
• Expansion Center (includes Outdoor Control Panel, model i5x or i10x). Note: Additional
Expansion centers need to be manually assigned, see page 26).
iS10 Spa-Side Remote
Adding Multiple 10 button Spa-Side remotes and Expansion Centers
Additional iS10 and SpaCommand spa-side remotes, and Expansion Centers need to manually enable from the
Indoor Control Panel. To manually enable an additional Expansion Center, see page 26, and an iS10 remote,
see page 30.

Adding a MobileTouch Wireless Controller

Before using a MobileTouch wireless controller with the IntelliTouch system, you must first manually enabled the
wireless controller from the Outdoor Control Panel. For details, refer to "Setting up the MobileTouch Wireless
Controller," page 28.
Indoor Control Panel
IntelliTouch System Controllers (automatically enabled)
Main Load Center or
Power Center
(Outdoor Control Panel
model i5+3, i5S+3, i9+3,
i9+3S, i10+3D)
IntelliTouch Pool and Spa Control System User's Guide
25
Expansion
Center (Outdoor
Control Panel
model i5x or
i10x). Can be
Load Center or
Power Center