Table of Contents
Advertisement
48
Setting up IntelliBrite LED lights
Selecting IntelliBrite Modes
From the "Modes" screen you can select various preset show color lighting effects, such as "American mode"
and "Sunset mode," and Sam Style (an emulation of the SAm color scheme). Using the "Hold" and "Recall"
feature (see page 49) you can also capture and save a unique color effect to recall at a later time.
Modes screen
To access the IntelliBrite "Modes" features from the Lights screen, press the Lights button on the bottom of
the screen, then press the left side button next to "MODES."
Color light
shows
Hold
Swim
Modes: Color light shows
There are six pre-programmed color light shows available to enhance your backyard pool environment.
Note: If the light was not previously on, after pressing a color show mode button, no illumination will
occur for up to ten (10) seconds (depending on the selection), then a white light will momentarily
illuminate, followed by the color show mode selection. If the light was previously on, pressing the a color
show mode button will momentarily illuminate the previously selected color before changing to the
selected color show.
•
SAm mode: Emulates SAm lights color scheme
•
Party mode: Rapid color changing building the energy and excitement
•
Romance mode: Slow color transitions creating a mesmerizing and calming effect
•
Caribbean: Transitions between a variety of blues and greens
•
American Mode: Patriotic red, white and blue transition
•
Sunset Mode: Dramatic transitions of orange, red and magenta tones
•
Royalty Mode: Richer, deeper, color tones
Feature: Swim
The "Swim" SAm Style feature cycles through white, magenta, blue and green colors. This feature emulates the
"Color Swim" feature (see page 42).
Note: If the light was not previously on, after pressing the SWIM button, no illumination will occur for
approximately six (6) seconds followed by the "COLOR SWIM" feature selection. If the light was
previously on, after pressing the SWIM button, the previously selected color will momentarily illuminate,
no illumination will occur for approximately six (6) seconds followed by the "COLOR SWIM" feature
selection.
IntelliTouch Pool and Spa Control System User's Guide
PARTY MODE
AMERICAN MODE
ROMANCE MODE
SUNSET MODE
CARIBBEAN
ROYAL MODE
HOLD
INTELLIBRITE
RECALL
SWIM
SAM STYLE
COLOR SET
LIGHT/INTELLIBRITE/MODES
BACK
EXIT
(Continued)
WARNING - During the off/on switching
process, before the selected color is
Color light
displayed, no illumination will occur. This
shows
operating mode is normal during the
Recall
switching process. During this period the
Color Set
pool and spa will be dark and
precautions should be taken to avoid
unforeseen accidents. Failure to observe
this warning may result in serious injury
or death to pool and spa users.
Advertisement
Table of Contents
Troubleshooting
