Creating A Macro Circuit - Intellitouch User Manual

80

Creating a Macro Circuit

A Macro circuit allows multiple combined circuits that can be switched on or off from a single button. For
example, a Macro circuit can be assign to one button to switch on the spa, spa light, fountain, fountain light, and
patio lights. The Macro circuit name (or custom name) can be added to the main list of "IntelliTouch circuit
names" (see page 37). A Macro circuit also has the capability to switch a circuit off. For example, a Macro
circuit named "SPA PARTY," if you wanted a spa fountain not to be on when spa is on (because it could put
cold water in the spa), it can be set up in the Macro to automatically switch off when "SPA PARTY" is switched
on. An "OFF" Macro can also be used to switch any number of lights off with one button.
Note: Macros may not be set as Dimmers although they can turn on light dimming circuits.
To create a macro circuit, go to the CIRCUIT MACRO screen.
Getting There
MENU SETUP CIRCUIT MACROS
Note: To create a Macro, first assign a FEATURE circuit name (see page 79), assign a function to the
Feature circuit (see page 39), then go to the Circuit Macro screen and set up the Macro circuit.
1. The already assigned Feature circuits will be displayed on the
Features screen. Ten (10) Feature circuits can be displayed on this
screen.
2. Press the button next to the Feature circuit name that will be the
MACRO circuit to control other Feature circuits. Press the
DISPLAY button to toggle between the Feature circuit screen and
the Display #1 (1) screen.
Macro Lights:
• To switch a circuit ON, press the button next to the circuit name one
time. The light will be on.
• To switch a circuit OFF, press the button next to the circuit name two times. The light blinks on and off.
• To set a circuit to be unaffected by the macro, press the button next to the circuit name three times. The light is
off.
Note: Be careful when you select circuits to switch on. One
macro circuit can switch on another macro circuit, resulting
in the system incorrectly switching on or off.
3. Press the Save button when finished.
4. Press the Exit button to return to the main screen.
IntelliTouch Pool and Spa Control System User's Guide
EDGE PUMP ALL LIGHTS CLEANERS CLEANERS
WATER FALL
MON 4:32AM
F
AIR TEMP 92˚
MENU HEAT LIGHTS DISPLAY
Feature circuits screen
DISPLAY
EXIT