Switching On Lights Manually - Intellitouch User Manual

12

Switching on Lights Manually

Up to 12 individual lights (IntelliBrite
switched on or off from the Lights screen. There are two light screens which can display up to six light circuits.
Use the "Next Group" button to access each group of six lights. You can also use the "ALL ON" or "ALL
OFF" buttons to switch all lights on or off. The "SYNC" button will also switch on then sync all color changing
lights to synchronize their colors when using the "Color Swim" feature. You can also configure IntelliBrite
MagicStream laminar lights, and setup the Color Swim, and Color Set special lighting features from the Lights
screen. Lights that have dimming functionality can be also dimmed from the Lights screen. SAm, SAL, fiber
optic, Halogen lights, and IntelliBrite cannot be dimmed. For more information, refer to "Setting up Lighting
Options," page 42.
ON/OFF
Light button
assigned to a
circuit
Color Swim
and Color set
buttons
Lights screen (S Am /S AL Color Swim and Color Set)
To switch on lights, press the Lights button on the bottom of the Lights screen.
1. To switch a light on, press the button next to the name of
the light. Up to six (6) light circuits can be displayed in
the upper part of the Light screen.
2. If there are more than six (6) light circuits assigned, press
the NEXT GROUP to see these circuits.
• Press the All ON button at the bottom of the screen to
switch all the lights on.
• Press the All OFF button at the bottom of the screen to
switch off the lights when you are done.
Note: Use the SYNC button to switch ON all IntelliBrite,
MagicStream laminar lights, SAm, SAL, or FIBERworks
color changing lights to synchronize their colors when using
the "Color Swim" lighting feature.
IntelliTouch Pool and Spa Control System User's Guide
® LED light, MagicStream
POOL LIGHT
SPA LIGHT
POOL SAM 1
SPA SAL
COLOR SET
COLOR SWIM
NEXT GROUP CONFIGURE
LIGHTS
ALL OFF SYNC
SAVE ALL ON
® laminars, SAm
SPA LIGHT
POOL LIGHT
IntelliBrite
INTELLIBRITE
button for
NEXT GROUP
Color and
Mode Light
show
SAVE ALL ON
Lights screen with IntelliBrite lights
and MagicStream laminars
View and
configure
next six light
circuits
®
or SAL® color lights) can be
®
®
MagicStream
circuit
POOL LAMINAR 1
POOL LAMINAR 2
buttons
MagicStream
MAGICSTREAM
CONFIGURE
button for
laminar
LIGHTS
features
ALL OFF SYNC
screen
SPA LIGHT POOL LIGHT
POOL SAM 1
SPA SAL
COLOR SWIM COLOR SET
NEXT GROUP CONFIGURE
LIGHTS
SAVE ALL ON ALL OFF SYNC
Switch all Switches all
lights ON lights OFF
lights,