Intellitouch User Manual page 57

Setting up IntelliBrite LED lights
To assign IntelliBrite light circuits to the Lights screen:
Getting There
PRESS BUTTON
LIGHTS CONFIGURE NEXT TO "NONE"
5. Press the Lights button on the bottom of
the screen.
6. Press the right side button next to
"CONFIGURE."
7. Press the button next to "NONE" to assign
an IntelliBrite light circuit to the selected
button. Light names can be setup to display
on the left side for "Spa" features and on
the right side for the "Pool" features.
Available light circuit
View/configure next
8. Press the top left or right side button to scroll through the available light circuits which can be used for the
IntelliBrite lighting features. Select at the circuit name you wish to use. The displayed circuit names are
circuit names that were previously assigned when assigning a circuit function. If there are no circuits
available for selection, refer to "Assigning Circuit Names, " on page 35, and "Assigning Circuit Functions
and Freeze Protection" on page 39 for more information.
Select the light circuit
Select the light position
delay time between lights
six light circuits
Select the color
Color Swim: Set the
(Continued)
No circuits
assigned to the
Lights screen
Lights screen using IntelliBrite lights
SPA SAL POOL LIGHT
POOL SAM 1
NONE
NONE
NONE
NEXT GROUP
LIGHTS/CONFIG-SELECTION
EXIT
BACK
PREV POOL SAM 1 NEXT
PREV WHITE NEXT
PREV 1ST POSITION
NEXT
PREV
DELAY 5 SECS
NEXT
LIGHTS/CONFIG/POOL SAM 1
SAVE EXIT
IntelliTouch Pool and Spa Control System User's Guide
MODES INTELLIBRITE COLORS
NEXT GROUP CONFIGURE
LIGHTS
SAVE ALL ON ALL OFF SYNC
Available light circuit
47