Setting Up Intellibrite Led Lights - Intellitouch User Manual

46

Setting up IntelliBrite LED lights

Up to twelve (12) IntelliBrite light circuits can be displayed on the main Lights screen. From the Lights screen
you can activate the IntelliBrite lighting features (i.e., color swim, color set). Assuming each IntelliBrite light has
its own relay and separate circuit. The IntelliBrite LED (light-emitting diode) underwater light system provides
brilliant vivid colors with spectacular effects for your pool, spa and landscape lighting features. Each of the
energy efficient IntelliBrite colored LED arrays can be individually controlled to custom create any color
sequence of the rainbow spectrum. The IntelliBrite LEDs can be set to activate and cycle through colors at
varying speeds, in different sequences of color.
Setting up IntelliBrite Lights
To setup IntelliBrite LED light circuits, first assign each light auxiliary relay circuit a circuit name, then assign that
light relay circuit in the "CIRCUIT FUNCTIONS" section, as "INTELLIBRITE."
To setup the IntelliBrite light circuits:
Getting There
MENU SETUP ADVANCED
1. Press the button next to the AUX button (the relay auxiliary
circuit connected to the IntelliBrite light).
2. Press the right or left side (PREV/NEXT) button next to
"INTELLIBRITE." Scroll through the circuit functions until
"INTELLIBRITE" is displayed. See page 41 for the
complete list of preset circuit functions.
3. Press the SAVE button on the bottom of the screen. Press
the EXIT button to return to the main screen.
4. Proceed to Step 5.
IntelliTouch Pool and Spa Control System User's Guide
CIRCUIT FUNCTIONS
AUX 1
AUX 5
AUX 3
AUX 6
AUX 2 AUX 7
AUX 4 AUX 8
1
MENU/SETUP/ADV/FUNCTION/SELECT
BACK EXIT
AUX 1
INTELLIBRITE NEXT
PREV
ON WITH FREEZE NO
MENU/SETUP/ADV/FUNC/AUX 1
BACK SAVE EXIT