Using The Once Only Timer - Intellitouch User Manual

16

Using the Once Only Timer

The "Once Only" programming feature enables IntelliTouch to automatically switch equipment on for one time
only. For example, you can set to have the spa and heater switch on before you get home from work for one
evening. Unlike a regular scheduled program, the "Once Only" program does not repeat.
Go to the PROGRAM/SELECT equipment screen. From this screen
you can select SPA, POOL or any of the AUX equipment circuits to
program.
The following example describes how to program the spa filter pump and
heater to switch on at a specific time:
1. Press the button next to SPA to access the "Program/Select"
screen. If this is the first program, the program counter displays
(1/0). After this program is saved, (1/1) is displayed (see step 5).
Up to 99 total programs may be created for all circuits combined.
2. Press the left side button next to HOURS and select ONCE
ONLY (Once Only is displayed one press after 11:00 PM).
3. Press the left side button next to HOURS to set the start time.
Note: Press the button under CLEAR to reset the default
settings.
4. Press the left side button next to DAYS to specify the day(s) to run
the program one time. Choose EVERYDAY* to run the program
one time each day of the five days. If the time you are setting has
passed for today, the ONCE ONLY program is set for the next
day. To choose specific days to run the program, press the button
next to DAYS. The days of the week screen displays. The LED
lights next to the days of the week will all be lit. To switch off a day,
press the button next to the displayed day. The light switches off.
To set all days on, all lights should be on.
Note (*): If you select EVERYDAY, the programmed time
will occur the next day or later the same day if the time has not yet been reached. If you select a
certain day of the week (only one) the programmed time will happen the next day of the week.
5. Press Save to save the current program. The program counter displays (1/1) indicating that you have saved
one (1) program for the selected circuit.
6. Press the Back button to return to the SPA, POOL and AUX equipment selection screen to choose other
equipment.
7. Press the Exit button to return to the main screen.
IntelliTouch Pool and Spa Control System User's Guide
MENU/PROGRAM/SELECT
BACK DISPLAY EXIT
SPA SS_NO 1/0
ONCE ONLY
MENU/PROGRAM/SPA
SMART
START