Creating Custom Names For Auxiliary Circuits - Intellitouch User Manual

38

Creating Custom Names for Auxiliary Circuits

There are twenty user-definable names available to identify custom equipment if the preset circuit names are not
suitable (see page 37 for the complete list of preset names). To create a custom name, choose one of the
twenty user names and change it to your name of choice. For example, USER NAME-01 could be changed to
LION'S HEAD for a waterfall or fountain. When assigning a Feature or Macro circuit (see page 79, 80), a
user-defined circuit name can be assigned to multiple circuits which can be switched on or off from one button
on the Indoor Control Panel or MobileTouch control panel.
To create a custom circuit name go to the Create Custom Names screen.
Note: Before creating a custom circuit name, first assign a function to the circuit (see page 39).
1. Press the button next to USERNAME-01 to access the
next screen to create a new circuit name. Up to ten user-
definable names (01-10) can be created on the first screen
and ten on the next screen (11-20). Press the DISPLAY
button to toggle between the two screens.
2. To navigate through the alphanumeric characters use the left
and right side buttons as shown below.
3. Once a character is selected, press the SELECT button then
move to the next character. Use the CLEAR button to
remove all characters.
4. Press the Save button when done. To create another custom circuit name repeat steps 1 through 4.
5. Press the Exit button to return to the main screen.
6. After creating a custom name, go to ASSIGN CIRCUIT NAMES (see page 35) and assign the custom name
to the auxiliary circuit. The custom name(s) will be displayed in the list of circuit names (see page 37).
Move cursor left
Scroll forward through characters
Move cursor up
Move cursor left
Delete and Backspace button
IntelliTouch Pool and Spa Control System User's Guide
N
Display
Clear
button button
USERNAME - 01
USERNAME - 01
USERNAME - 01 USERNAME - 01
USERNAME - 01
USERNAME - 01
USERNAME - 01 USERNAME - 01
USERNAME - 01 USERNAME - 01
MENU/SETUP/ADV/CUSTOM/SELECT
BACK DISPLAY
EXIT
Display button
Move cursor right
Scroll back through characters
Move cursor down
Move cursor right
Select button