Spa Options; Set Automatic Spa Heating When The Spa Is Manually Switched On; Freeze Override 30-240 Minutes; Changing The Display To Show Fahrenheit To Celsius - Intellitouch User Manual

SPA Options

Set Automatic Spa Heating When the Spa is Manually Switched On

Getting There
MENU SETUP EQUIPMENT
Go to the Spa Options screen.
1. Press the left or right side button next to Spa Manual Heat to
change the setting to Yes (the default setting for Manual Heat is
Yes).
Note: If you do not want the heater to switch on when you press
the SPA button, change the factory setting from YES to NO.

Freeze Override 30-240 minutes

2. Press the left or right side button next to Freeze Override
Mins to change the default freeze protection time of 30
minutes to a maximum of 240 minutes in 30 minutes
increments.
3. Press the Save button when finished.
3. Press the Exit button to return to the main screen.

Changing the Display to Show Fahrenheit to Celsius

You can change the temperature settings to display either Fahrenheit or Celsius. Temperature settings can be
adjusted from 40° F to 104° F or (4° C to 40° C).
To change the temperature settings go to the Degrees C/F screen.
1. Press the left or right side button next to
Degrees Displayed In to select C (Celsius) or
F (Fahrenheit).
2. Press the Save button.
3. Press the Exit button to return to the main screen.
MANUAL HEAT
FREEZE OVERRIDE MINS
MENU/SETUP/EQUIP/SPA OPTIONS
SAVE
IntelliTouch Pool and Spa Control System User's Guide
77
YES
30