Special Lighting Features - Intellitouch User Manual

Special Lighting Features

At least two (2) IntelliBrite, SAm and/or SAL, and/or FIBERworks lighting systems are required to use the
Color Swim, Color Set and Sync special lighting features. Up to twelve (12) lights can be independently
controlled from the Lights screen.
SAm, SAL, or FIBERworks lighting special lighting features:
Note: The IntelliBrite Color Swim and Color Set (SAm Style) feature is accessed from the Lights
screen. See page 46 for more information.
• Color Swim - Presets the light circuit to transition through colors in sequence. This gives the appearance of
colors dancing through the water. You can adjust the delay of each light to make the colors move at different
speeds. This feature requires a separate relay for each light.
• Color Set - Presets the light circuit to a specific colors. This feature requires a separate relay for each light.
• Sync - Switches on all IntelliBrite, SAm, SAL, or FIBERworks color changing lights to synchronize their
colors.
Note: For SAm and SAL lighting setup information, see "Setting up Lighting Options," on page 42.
To activate the special lighting features, press the Lights button on the bottom of the main screen.
Light buttons:
• Press the COLOR SWIM button to start the changing color lights feature.
• Press the COLOR SET button to set all lights to a pre-programmed color.
• Press the SYNC button to switch on all color changing lights to synchronize colors.
• To configure lights on this screen press the CONFIGURE button.
Note: Depending on what kind of light is being activated and what mode it was in previously, it may
take up to a minute or more after the Color Set, Color Swim, or Sync button is pressed to activate
the feature.
Switch COLOR SWIM ON.
Pressing the button again will
not switch COLOR SWIM
OFF. Use the ALL OFF button
SPA LIGHT POOL LIGHT
SPA SAL POOL SAM 1
COLOR SET
COLOR SWIM
NEXT GROUP CONFIGURE
LIGHTS
SAVE ALL ON ALL OFF SYNC
Switches all SAm, SAL and
Fiberworks lights ON and
Synchronizes lights
"Color Set" buttons for
assigned light circuits
Switch COLOR SET ON.
Pressing the button again will
not switch COLOR SET OFF.
Use the ALL OFF button
Switch on all color changing
lights to synchronize colors
IntelliTouch Pool and Spa Control System User's Guide
13