Selecting Display Screen 1, 2, 3, Or 4; Assigning Circuit Names - Intellitouch User Manual

Selecting DISPLAY Screen 1, 2, 3, or 4

The auxiliary circuits that control the pool and spa equipment can be accessed from the "Display" screen on the
Indoor Control Panel or MobileTouch wireless control panel. Selecting the button next to Display 1, 2, 3, or 4
displays the screen with circuits belonging to that particular expansion Load Center or Power Center. "Feature
Circuits" can also be assigned from this screen. For more information about "Feature Circuits," see page 76.
To assign circuit names for a specific display screen:
Getting There
MENU SETUP ADVANCED
DISPLAY 1
DISPLAY 2
DISPLAY 3
DISPLAY 4
FEATURE
BACK

Assigning Circuit Names

In order to identify the equipment connected to the auxiliary circuits (SPA, AUX 1, AUX 2) in the Load Center,
you need to assign equipment names to the corresponding auxiliary circuits in the Indoor Control Panel.
Using the written list of circuit names (button 1, button 2, etc.) made while setting up the system. Match the label
name that was placed under each button (1, 2, etc.) on the Load Center Outdoor Control Panel with the
selected circuit name that will be displayed on the "Main Display" screen.
Choose a circuit name from the preset list of names (see page 37) for
equipment connected to the auxiliary relays installed in the main Load
Center. There are also 20 user-definable names to use for other pool and
spa related equipment if the preset circuit names are not suitable
(see page 38).
To assign circuit names for the MAIN SCREEN:
1. Select the button next to Display #1 (Main Display screen, see page
7). These are the circuit names that will be displayed on the Main
Screen. Note: If there is an expansion Load Center or Power
Center installed, select the appropriate Display #2, #3, or #4
associated with that expansion Load Center or Power Center.
2. From the Main Display screen, press the button next to AUX 1.
A small arrow pointing to AUX 1 is displayed.
3. Use the Up and Down buttons at the bottom of the screen to scroll through the alphabetical list of preset
equipment names. Choose the equipment name that matches the label name for button number 1 on the Load
Center Outdoor Control Panel.
CIRCUIT NAMES ASSIGN CIRCUIT NAMES DISPLAY
Display #1 - This screen shows circuit names for the filter pump,
pool and spa modes, and all high voltage auxiliary circuits
connected to the main Load Center or Power Center.
Display #2 - This screen shows circuit names for the additional
auxiliary circuits connected to the first expansion center (Load
Center or Power Center).
Display #3 - This screen shows circuit names for the additional
auxiliary circuits connected to the second expansion center (Load
EXIT
Center or Power Center)
Display #4 - This screen shows circuit names for the additional
auxiliary circuits connected to the third expansion center (Load
Center or Power Center).
FLOOR CLNR
FOUNTAIN
BBQ LIGHT
EDGE PUMP
MENU/SETUP/ADV/AUX/NAME/DISP #1
BACK SAVE
Down/Up button
IntelliTouch Pool and Spa Control System User's Guide
35
CLEANER
BACK LIGHT
WATER FALL
LIONS HEAD
DOWN UP